Pioneer X-SMC11DAB-S - Manual (Page 10)

Connections 03
10
En
Chapter 3:
Connections
CAUTION
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting antenna
Connect the DAB/FM wire antenna as shown below. To
improve reception and sound quality, connect external
antennas (see Using external antennas below).
1 Connect the DAB/FM wire antenna into the
DAB/FM antenna socket.
For best results, extend the DAB/FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve DAB/FM reception
Use a PAL connector (not supplied) to connect an external
DAB/FM antenna.
Plugging in
After you’ve finished making all connections, plug the unit
into an AC outlet.
1 Plug the supplied AC adapter into the DC
IN socket on the side of the unit.
2 Plug the supplied power cord into the AC
adapter then plug the other end into an AC
outlet.
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
• The cord length from the unit to the AC adaptor is 1.5 m
long. Make sure that you use the AC adaptor so that it is
not suspended in air.
PHONES
AUDIO IN
ANTENNA
DC IN
18 V
5 V
2.1 A
1
PHONES
AUDIO IN
ANTENNA
DC IN
18 V
5 V
2.1 A
One-touch PAL
connector
75 coaxial
cable
To AC outlet
Power cord (Supplied)
AC adapter
(Supplied)
In contact with the ground
Suspended off the ground
1.5 m
To AC outlet
To AC outlet
X-SMC11DAB-S_VXE8_En.book 10 ページ ２０１３年８月６日 火曜日 午前９時２５分