Beltronics Vector 955 - Manual (Page 13)

11
Programming
There are 6 user-selectable options so you
can customize your V955 for your own
preferences. The buttons labeled CITY and
BRT are also used to enter the Program
Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The words PGM, RVW, and CHG
are located on the top of the detector, and
are highlighted in colored graphics. Pages
13-14 explain each option in more detail.
How to use Programming
1 To enter Program Mode, press and
hold both the CITY and BRT buttons
down for 2 seconds. (The unit will beep
twice, and will display the word Program).
2 Then press the RVW button to
review the current settings. (You can
either tap the button to change from item to
item, or hold the button to scroll through
the items).
3 Press the CHG button to change
any setting. (You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options).
4 To leave the Program Mode, simply
wait 8 seconds without pressing any
button, or press the PWR button. (The
unit will display Complete, beep 4 times,
and return to normal operation).
An example
Here is how you would turn your V955’s
AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds. The V955 will beep twice and
display Program.
2 Then hold the RVW button down. The
V955 will scroll through the categories,
starting with Pilot ( Pilot ), Voice
( Voice ), Power-on sequence ( PwrOn ),
and then AutoMute (aMute ).
3 Release the RVW button when the
V955 shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
the V955 will display aMute ON .
(If you accidentally don’t release the
RVW button in time, and the V955 goes to
the next category, hold the the RVW button
down again, and after your V955 scrolls
through all categories, it will begin again
at the top of the list.)
4 Press the CHG button to change from
aMute ON to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any button,
or press the PWR button. The V955 will
display Complete, beep 4 times, and return
to normal operation.