B&B Electronics 485DSS - Manual (Page 10)

6 485DSS-0308 Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445
Figure 3. RS-485 Wiring Diagram
4-Wire Mode
To configure the 485DSS for RS-485 or 422 four-wire mode,
place the jumper in the 4W position. Refer to Figure 4 for
connecting information and Figure 2 for the jumper location. In this
position on a 4-wire network the Host and the RS-232 device can
communicate in full duplex. CAUTION: Data loss may occur if the
Host sends 485DSS commands while the host is receiving data from
the network!