B&B Electronics 485DSS User Manual
Page 20
16
485DSS-0308
Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445
Chapter 2: SOFTWARE
Description
The Distributed Smart Switch Demonstration (DSS_DEMO)
Program (IBM PC or Compatible) provides the user with examples of
how to receive and transmit commands to the 485DSS. The
DSS_DEMO.EXE is a DOS executable program written in
QuickBasic that will send turn on, turn off, and status request
commands to the 485DSS. The program also monitors reply
messages from any or all 256 addresses. The source code is
written in QuickBasic (DSS_DEMO.BAS), Borland Pascal
(DSS_DEMO.PAS) and Borland and Microsoft C/C++
(DSS_DEMO.C). The source code provides an illustration of how to
send and receive commands for the 485DSS. SimpCom Version
1.03+ is required to recompile DSS_DEMO.C and
DSS_DEMO.PAS.
NOTE: This is a demonstration program only and not intended for
system applications.