Specifications – BBE DI-400 User Manual
Page 11
Frequency Response @ Line Out,
process mode:…………………………………………………Program Controlled
bypass mode: …………………………………………………10Hz to 50kHz (+/- 1dB)
Signal to Noise Ratio:
BBE OUT ………………………………………………………118dB
BBE IN (@ 10) …………………………………………………115dB
THD:
BBE OUT ………………………………………………………less than 0.005% at -l0dBu input 20-20kHz
BBE IN …………………………………………………………0.05% (20-20kHz)
Noise:
BBE OUT ………………………………………………………-105dBu
BBE IN (@ 0) …………………………………………………-94dBu
BBE IN (@ 10) …………………………………………………-85dBu
Input Impedance:
instrument ……………………………………………………1 MEG Ohms
line ………………………………………………………………12k Ohms
Output Impedance:
XLR ……………………………………………………………600 Ohms
* 0dBu = 0.775Vrms
Power Requirements: …………………………………………………U.S., Canada & Japan models: 120VAC, 50/60Hz, 8 WATTS
…………………………………………………………………Standard model: 220VAC, 50/60Hz, 8 WATTS
Dimensions: …………………...... ……………………………………
19"(W) x 5.5"(D) x 1.7"(H)
Shipping Weight: ………………………………………………………7 lbs.
Note: Due to continuing product improvement, specifications and design are subject to change without notice.
SPECIFICATIONS
11