BBE DI-400 - Manual (Page 5)

LOW CONTOUR CONTROL
Regulates the amount of phase
corrected bass frequencies.
PROCESS CONTROL
Regulates the amount of
phase correction.
IN/OUT PUSH BUTTON
Engages the Sonic Maximizer
Process. When the switch is
pushed in, the BBE Process is
on. When the switch is up,
the BBE Process is off.
PAD PUSH
BUTTON
Push in to
activate
“-15dB” pad.
1/4” INPUT CONNECTOR
The 1/4” input connector of the
DI-400 is unbalanced. The 1/4”
input is designed for running
instrument cables directly into
the DI-400.
1/4” THRU
CONNECTOR
This 1/4“ connector
is wired in parallel
to the Input
connector and is
used for continuing
the connection to
the instrument
amplifier.
FRONT PANEL
5
POWER SWITCH
The Sonic Maximizer
LEDs will illuminate
when the power is on. PHASE PUSH
BUTTON
Push in to
reverse phase.
LED STATUS
“RED” = power on,
BBE off/out, “GREEN”
= power on, BBE on/in.
LED not illuminated =
power off.