Britax Regent - Manual (Page 20)

36 37
Buckle Removal
Locate the metal buckle strap 1
retainer on the bottom of the child
seat.
Pull retainer away from child seat 2
to loosen.
Turn the retainer so that the short 3
side will go through the slot in the child seat shell (Fig. A).
Push the retainer through slots in the shell and cover, to the 4
front of the child seat.
Rethreading the Buckle
Locate the necessary buckle slot. 1
Turn the buckle retainer so that the short side will fit through 2
the slot in the cover and child seat shell (Fig. A).
Push the retainer through the slots in the cover and shell to the 3
bottom of the child seat.
Pull buckle away from the child seat until tight, then verify that 4
the strap is not twisted and the release button is facing out.
Verify that the buckle retainer lies flat against the the child seat 5
shell.
Cleaning the Buckle
If your child eats and drinks while in the child
seat, you may need to check the buckle
periodically and wash out any accumulated
debris or dried liquids.
THOROUGHLY RINSE, using warm s
water (Fig. B).
SOAK, overnight if possible, using warm s
water to loosen hardened drinks or food.
TEST THE BUCKLE, by fastening and s
unfastening until a positive click is
heard after inserting the second buckle
tongue (Fig. C). If click is not heard,
repeat cleaning procedure.
TOWEL DRY s
DO NOT:
Lubricate s
Use solvents s
Use soap or household detergents s
Care and Maintenance Care and Maintenance
A
B
C