Pintuck sewing – Brother PC 6500 User Manual
Page 52
49
PINTUCK SEWING
1. Mark the positions of the folds on the wrong side of the
fabric.
1
Wrong side of fabric
2. Fold over the fabric and iron only along the folds.
1
Right side of fabric
3. Press [Straight (Mid)], and then press
(presser
foot I). The thread tension automatically adjusts for presser
foot I.
Note
If you pressed
then PINTUCK, the thread tension is
automatically adjusted.
I
4. Attach the presser foot holder to the right pin of presser foot
I, and sew a straight stitch along each fold.
1
Width of pintuck
2
Wrong side of fabric
3
Right side of fabric
Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reverse stitches before
sewing. In addition, pressing the reverse/reinforcement stitch
button at the end of the stitching automatically sews reverse
stitches, trims the threads and stops the machine.
1
Straight (Mid) [straight stitch (center needle position)]
I
5. Iron the folds toward the same direction.
1