BT paperjet 50 - Manual (Page 17)

PaperJet 50 user guide – Edition 3 – 29.8.00
15
Using your PaperJet 50
Sending faxes
What type of paper you can use
Dimensions:
• width
148mm – 216mm.
• length 216mm – 600mm.
Thickness:
•
60 - 90gsm max 5 sheets.
• 50 -140gsm 1 sheet at a time.
• 140 -160gsm when using the document holders.
Do not use
• Torn, crumpled and rolled paper.
• Paper that is too thin (unless in the document
holder supplied).
• Wet or moist paper.
• Carbon paper.
• Correction fluid, paperclips and staples.
Inserting documents in the feeder
• Gently insert documents to be faxed (up to 5 pages)
face down.
• Adjust the paper feeder width guides to fit.
Setting the contrast and resolution
You can choose different resolution and contrast
settings to ensure the best quality when faxing or
copying a document.
Setting the contrast and resolution
After inserting the document in the feeder.
Contrast
Press the Contrast button.
To select the setting you want.
• NORMAL – when the original document
is clearly printed.
• DARK – when the original document is
light.
• LIGHT – when the original document is
dark.
After the fax has been sent, your PaperJet
always resets to normal contrast.
Resolution
Press the Resolution button.
To select the setting you want.
• STD (standard) – when the original
contains easy to read text.
• FINE – when the original contains small
or hard-to-read text or line diagrams.
• FINE and HALF-TONE – when the
original contains varying shades of grey
or pictures.
NOTE
FINE and HALF-TONE settings take longer to send.
Volume
Volume
ᮣ
Contrast
ᮤ
Resolution
PaperJet 50 User Guide 26/7/01 10:18 am Page 15