Toshiba XDE600 - Manual (Page 33)

33
Function setup
Aspect Ratio
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
Aspect Ratio.
4) Press ENTER button, then use the / button to shift
and change the TV type.
5) P r e s s E N T E R
button.
6) P r e s s S E T U P
button to exit the
menu.
4:3
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fi ll your TV
screen. Either or both sides of the picture
are cut off.
16:9
Select when a 16:9 TV is connected.
Notes
• The displayable picture size is preset on the DVD.
Therefore, the playback picture of some DVDs may not
conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size
only, and you own a 16:9 TV set, Video Output picture
will be 16:9 only. Please change TV picture setting by
TV side.
• If you select “16:9” and you own a 4:3 TV set, the DVD
playback picture will be horizontally distorted during
playback. Images will appear to be horizontally compressed.
Always be sure that your TV shape conforms to the actual
TV in use.
DVD
View Mode
The user may select one of the following options:
Fill:
Fill the screen with decoded image.
Original: Display image as it original size. “Original” is
preferred for Jpeg viewing.
Auto Fit: Automatically fi t the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select View
Mode.
4) Press ENTER button, then use the / button to the
options (Fill, Original, Auto Fit, or Pan Scan).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio : 16 : 9
Video out
HDMI Resolution
JPEG Interval
TV System
Picture Modes : Sharp
TV System
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
TV System.
4) Press ENTER button, then use the / button to
shift and change the TV system.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Pan Scan
Select when a standard 4:3 TV is
connected. Displays pictures cropped
to fi ll your TV screen. Either or both
sides of the picture are cut off.
Auto Fit
Automatically fi t the decoded image on
screen without distortion. Black bars
will be present on top/bottom or left/
right of screen.
Note
Depending on the DVDs, you may not be able to view
the mode as selected.
NTSC: Select if your TV system is NTSC.
PAL: Select if your TV system is PAL.
Auto: The DVD player automatically identifies PAL
or NTSC video system of a disc. Connect a
multisystem TV (PAL / NTSC compatible) to view
a picture. A playback picture may be distorted
when detected a signal change between PAL and
NTSC on the disc. For the case of Progressive
mode, your multisystem TV must be able to support
525p and 625p.
Aspect Ratio : 16 : 9
HDMI Resolution
: Auto Fit
Auto
Video out
NTSC TV System
PAL
JPEG Interval
Picture Modes : Sharp
Aspect Ratio
Video out
HDMI Resolution : Auto
JPEG Interval : 5 seconds
TV System
: HDMI
Picture Modes : Sharp