Wireless communications, Wireless communications -44, Disconnecting – Toshiba PORTEGE M400 User Manual

Page 112: Wireless lan

Advertising
background image

User’s Manual

4-44

Operating Basics

Disconnecting

To disconnect the internal modular cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. Disconnect the cable from the computer’s modem jack in the same

manner.

Wireless communications

The computer’s wireless communication function supports both Wireless

LAN and Bluetooth devices.
All models are provided with a wireless communication switch. Some

models are equipped with both Wireless LAN and Bluetooth functions.

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct

Sequence Spread Spectrum / Orthogonal Frequency Division Multiplexing

radio technology that complies with the IEEE802.11 Wireless LAN standard

(Revision A, B or G).

Theoretical maximum speed: 54Mbps (IEEE802.11a, 802.11g).

Theoretical maximum speed: 11Mbps (IEEE802.11b).

Frequency Channel Selection (Revision A: 5 GHz, Revision B/G:

2.4 GHz).

Roaming over multiple channels.

Card Power Management.

Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit

encryption algorithm.

Wi-Fi Protected Access (WPA).

Advanced Encryption Standard (AES) data encryption.

Wake-up on Wireless LAN.

Do not install or remove an optional memory module while Wake-up on

Wireless LAN is enabled.

The Wake-up on Wireless LAN function consumes power even when

the system is off. Leave the AC adaptor connected while using this

feature.

The Wake-up on Wireless LAN function is effective only when it is

connected with an Access Point. This function becomes invalid when

the connection is broken.

Advertising
This manual is related to the following products: