Installing the battery pack – Toshiba Satellite M50 (PSM53) User Manual

Page 118

Advertising
background image

TOSHIBA M50

6-11

Power and Power-Up Modes

6. Unlock the Battery Pack Lock.

Removing the battery pack-1

7. Slide the battery pack latch to the left, then pull the battery out of the

battery bay.

Removing the battery pack-2

Installing the battery pack

To install a battery pack, follow the steps below.

1. Turn the computer's power off.

2. Disconnect all cables connected to the computer.

3. Hold the battery pack so that the label faces down and the connectors

on the battery face the connectors on the computer.

1

3

2

The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.

Advertising
This manual is related to the following products: