Toshiba Magnia 3030 - Manual (Page 31)

Getting Started
Front view (with the front doors opened)
13
Operation switches
™
*1:The sleep mode is operational only when an ACPI-supporting OS (operating system such
as Windows 2000) is installed on the system.
See the instruction manual for your OS.
NMI
switch This switch is provided exclusively for the autho-
rized Magnia service provider.
Reset
switch Press this button to reset the server. Use a fine
wire etc. to press this switch.
Sleep
switch Allows you to switch the system between normal
operation mode and power saving mode (sleep
mode). *1
Power
switch Press this button to turn on or off the server.
ON ... Pressing the button once causes the server
to start up after setting off a buzzer.
OFF ... Press and hold the button down until the
buzzer starts sounding continuously after sound-
ing intermittently. It takes about 4 seconds before
the buzzer starts sounding continuously.
If you move your finger off the power switch
before the buzzer sound mode changes, the ter-
mination process will discontinue and the server
will not shut down.
Power ( )
NMI ( )
Reset ( )
Sleep ( )
NMI
NMI