Toshiba Satellite U200 - Manual (Page 180)

9-14 User’s Manual
Troubleshooting
USB mouse
Double-tapping does
not work
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as required and
click OK.
If problems persist, contact your dealer.
The reaction of Touch
pad is either too
sensitive or not
sensitive enough.
Adjust the touch Sensitivity.
1. Click start and open the Control Panel.
2. Click the Printers and Other Hardware icon.
3. Click the Mouse icon.
4. Click the Advanced tab.
5. Click the Advanced feature settings button.
6. Click Touch Pad tab. Click the Settings
button in the Pointer speed and tapping
settings.
7. Detailed Touch Pad setting is displayed.
8. Move the slide of adjust the pointer speed in
relation to the standard Windows setting.
Click the OK button.
9. Click the OK button on Advanced feature
setting screen.
Problem Procedure
On-screen pointer
does not respond to
mouse operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Double-clicking does
not work
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as required and
click OK.
Problem Procedure