When writing or rewriting – Toshiba Satellite U200 User Manual

Page 88

Advertising
background image

4-20

User’s Manual

Operating Basics

Do not write while a virus check software is running. Wait for it to finish

and then disable virus detection programs including any software that

checks files automatically in the background.

Do not use hard disk utilities, including those intended to enhance hard

disk drive access speed. They may cause unstable operation and data

damage.

CD-RW (Ultra Speed +) media is not supported. If used, data may be

lost or damaged.

Write from the computer’s hard disk drive to the CD/DVD. Do not try to

write from shared devices such as a LAN server or any other network

device.

Writing with software other than RecordNow! Basic for TOSHIBA

(optional), TOSHIBA Disc Creator (optional) and InterVideo WinDVD

Creator Platinum is not recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a

CD-R/RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

Do not perform any of the following actions when writing or rewriting:

Change users in the Windows XP operating system.

Operate the computer for any other function, including using a

mouse or Touch Pad or closing/opening the LCD panel.

Start a communication application such as a modem.

Apply impact or vibration to the computer.

Install, remove or connect external devices, including the following:

PC card, SD/SDIO card, Memory Stick/Memory Stick Pro, xD

picture card, MultiMediaCard, USB devices, external monitor, i.LINK

devices, optical digital devices.

Use the Audio/Video control button to reproduce music or voice.

Open the optical disc drive.

Remove the optical disc from the Optical Disc Drive.

Do not use shut down/log off and standby/hibernation while writing or

rewriting.

Make sure writing or rewriting is completed before going into

standby/hibernation. Writing is completed if you can open the

DVD-ROM&CD-R/RW or DVD Super Multi drive tray.

Set the computer on a level surface and avoid places subject to

vibration such as airplanes, trains, or cars. Do not use an unstable

surface such as a stand.

Keep mobile phones and other wireless communication devices away

from the computer.

Always copy data from the hard disk drive to the optical disc. Do not use

cut-and-paste. The original data will be lost if there is a write error.

Discs created in DVD-R DL format4 (Layer Jump Recording) cannot be

read.

Advertising