Toshiba Magnia Z500 - Manual (Page 72)

Installing and Removing Hardware
Removing and replacing the server panels
53
4 Open the front panel.
See “Front panel” on page 11
5 Slide the top panel stopper to the left.
6 Slide the top panel to the front of the server and remove it.
Removing the top panel
Replacing the server panels (for Micro Tower Types)
Follow these steps to replace the server panels:
1 Replace the top panel to the server carefully so that it does not
catch any cable.
2 Slide the top panel stopper to the right.
3 Attach the outer cover (upper) and fix them together by one
screw.
4 Close the front panel.
5 Plug the power cable.
Removing/replacing the server panels (for Rack Types)
Remove/replace the server panels after sliding the server out of the
rack.
The outer cover is not provided on Rack Types.
See “Sliding the server into or out of the rack” on page 60.