Toshiba AT200 - Manual (Page 22)

1. If you have entered data, either save it to flash memory or to other
storage media.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off the power, disconnect an external storage tablet or
remove storage media during data read/write. Doing so can cause
data loss.
2. Turn off or remove any peripheral devices connected to the tablet.
3. Press and hold Power button for 2 seconds and select OK to turn off
the tablet.
In any emergency case, you can also press and hold Power button for
about 10 seconds to force power off.
Do not turn the tablet back on immediately - wait a short period to
avoid any potential damage.
Turning the LCD off/on
You can turn the LCD off (while the system is still running) in one of the
following ways:
Press Power button.
Set the screen timeout in Settings.
To turn the LCD on:
Press Power button once again.
Unlocking your screen
After turning on the LCD, the screen remains locked. You can unlock the
screen in the following ways:
1.
Press and hold the unlock icon ( ).
2. Slide the icon towards the appearing circle.
Figure 3-6 Lock screen
If you have set up a screen lock through one of the three ways as pattern,
PIN or password, the method of unlocking the screen will be different. See
TOSHIBA AT200
User's Manual 3-10