Toshiba Magnia 3100 - Manual (Page 65)

57 HW Diagnostics
PRINTER TEST
[05. PRINTER TEST]
To test the operation of the printer port.
[01. Print Ripple pattern]
This subtest prints characters for codes 20h through 7Eh, line-by-line, while shifting one character to
the left at the beginning of each new line.
Print Ripple Pattern Example
PRINTER TEST (PRT) Error log
Status Error name Meaning
01 TIME OUT Time out of printer control
[06. SCSI HDD TEST]
This test checks the HDD functions connected to the SCSI-Bus through the ASPI driver software. Before
running the test, you must designate the items for testing.
HOST ID NUMBER
This option sets the target host adapter number. When you choose "ALL", the subtest tests all disks
connected to the server, and the next options, SCSI ID NUMBER and CHANNEL NUMBER will be
ignored.
SCSI ID NUMBER
This option sets the SCSI ID to test. You can specify just one ID to test except ID:7.
CHANNEL NUMBER
If the server has multiple SCSI channels, this option sets the channel number to test.
[01. Sequential address read]
This subtest is a sequential reading of all the blocks on the HDD, starting at block 0.
[02. Connection]
This subtest reads the logical sector at the end of the HDD, and then recognizes if the drive is connected
or not.