Toshiba Magnia 3100 User Manual
Page 68
60
HW Diagnostics
SCSI TEST
[09. SCSI TEST]
To test the SCSI devices.
Before running the test, you must set the parameters. If "HOST ID NUMBER" is set as "ALL", "SCSI ID
NUMBER" and "CHANNEL NUMBER" are ignored.
[01. INQUIRY]
This subtest issues the INQUIRY command to the SCSI bus and displays result messages returned
from the devices on the SCSI bus. After specifying the valid host and channel number, the
INQUIRY command is sent to the target SCSI bus. It then displays the result code from ID0
through ID15.
CHAN
Indicates the ASPI angle ID and host adapter.
HOST
The channel number in the target host adapter.
ID00, 01, 02 …
The SCSI ID number in the target host adapter.
The types of SCSI devices to be displayed are as follows:
HDD
Hard disk device
CD
CD-ROM device
CMT
Magnetic tape device
SCN
Scanner
PRT
Printer
MO
Magnet-optic disk device
PRC Processor
(SAF-TE) MC Media
changer
WON
Write Once device
COM
Communication device
???
Undefined device
---
Not connected
The following screen shows an example when the built-in hard disk drive is connected to the
on-board SCSI controller.
INQUIRY Screen