Toshiba Tecra A4 (PTA42) - Manual (Page 41)

User’s Manual 2-11
The Grand Tour
Optical Media drive
CD-RW/DVD-ROM drive, DVD-ROM drive, DVD Super Multi drive (+-R
DL). An ATAPI interface controller is used for CD/DVD-ROM operation.
When the computer is accessing a CD/DVD, an indicator on the drive
glows.
Region codes for DVD drives and media
CD-RW/DVD-ROM, DVD-ROM, DVD Super Multi (+-R DL) drive and media
are manufactured according to the specifications of six marketing regions.
When you purchase DVD-Video, make sure it matches your drive,
otherwise it will not play properly.
Writable discs
This section describes the types of writable CD/DVD discs. Check the
specifications for your drive to for the type of discs it can write. Use
RecordNow! Basic for TOSHIBA to write compact discs. Refer to
Chapter 4, Operating Basics .
Check the Disk-In-Use indicator when you use the diskette drive. Do not
press the eject button or turn off the computer while the light is glowing.
Doing so could destroy data and damage the diskette or the drive.
■ The external diskette drive should be placed on a flat, horizontal
surface when in use. Do not set the drive on an incline greater than 20°
while it is operating.
■ Do not set anything on top of the diskette drive.
Code Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America, South
America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China