Grounding instructions, Wiring, Page 6 – Broan VX12000C User Manual

Page 6

Advertising

page 6

GROUNDING INSTRUCTIONS

WIRING

This section refers to Figure 17 and 18.

Grounding Instructions – This appliance must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current, to reduce the risk of electric shock. This appliance is equipped with a cord
having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.

Danger – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with
the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This appliance is for use on a standard 120 VAC, dedicated 15-amp branch circuit with a NEMA 5-15R receptacle or a dedicated
20-amp branch circuit with a NEMA 5-20R receptacle for Broan models VX3000C & VX6000C. For Broan model VX12000C, a dedicated
nominal 240 VAC, individual 20-amp branch circuit with NEMA 6-20R receptacle is required. Make sure that the appliance is
connected to an outlet and has a grounding attachment plug that looks like the plug shown in either Figure 17 or 18 depending on
the model. No adapter should be used with this appliance.

OTHER
INLETS

NOTE:

INLET LEADS TO BE CONNECTED TO POWER UNIT

TERMINALS USING CRIMP CONNECTORS
AND LOW VOLTAGE WIRE HARNESS

INLET
LEADS

MODEL V133 18/2 WIRE

POWER

UNIT

POWER
CORD

NORTH AMERICA

AC ELECTRIC

OUTLET

GROUND PIN

NEMA 6-20R

240 VOLT GROUNDED
OUTLET BOX

AE0010A

CRIMP CONNECTORS

LOW VOLTAGE WIRE

LOW VOLTAGE

WIRE HARNESS

Broan VX12000C

FIGURE 17

FIGURE 18