Nokia E90 Communicator - Manual (Page 109)

• Certificate not trusted — You have not set any application to use the certificate. You may want to change the trust settings.
• Expired certificate — The period of validity has ended for the selected certificate.
• Certificate not valid yet — The period of validity has not yet begun for the selected certificate.
• Certificate corrupted — The certificate cannot be used. Contact the certificate issuer.
Security modules
Select > Tools > Settings > General > Security > Security module .
To view or edit a security module, scroll to it, and press the scroll key.
To view detailed information about a security module, select
Options > Security details .
The key store contains the contents of the security module. To delete the key store, select Key store , select the desired key store,
and Options > Delete . You may not be able to delete the key store of all security modules.
Security module codes
Select > Tools > Settings > General > Security > Security module .
To edit the PIN codes for the security module, select Module PIN to edit the PIN code for the security module or Signing PIN to
edit the PIN code for digital signatures. You may not be able to change these codes for all security modules.
To view detailed information about the security module, select
Options > Security details .
Memory card security
Select > Tools > Memory .
You can protect a memory card with a password to prevent unauthorized access. To set a password, select Options > Set
password . The password can be up to eight characters long and is case-sensitive. The password is stored in your device. You do
not need to enter it again while you use the memory card on the same device. If you use the memory card on another device,
you are asked for the password. Not all memory cards support password protection.
To remove the memory card password, select
Options > Remove password . When you remove the password, the data on the
memory card is not protected against unauthorized use.
To open a locked memory card, select
Options > Unlock memory card . Enter the password.
If you cannot recall the password to unlock a locked memory card, you may reformat the card, in which case the card is unlocked
and password removed. Formatting a memory card destroys all data stored on the card.
Lock the device
When the device is locked, calls may be possible to the official emergency number programmed into your device.
To prevent access to the contents of your device, lock the device in the standby mode. Press the power key, select
Lock phone ,
and enter your lock code. The default lock code is 12345. To unlock, press the left selection key, enter your lock code, and press
the scroll key.
You can also lock the device remotely by sending a text message to the device. To enable remote locking and to define the text
for the message, select > Tools > Settings > General > Security > Phone and SIM card > Allow remote lock > Yes . Enter
the remote lock message and confirm the message. The message must be at least 5 characters long.
To change the lock code, select >
Tools > Settings > General > Security > Phone and SIM card > Lock code . Enter the old
code and then the new code twice. The new code can be 4-255 characters long. Both alphabets and digits can be used, and both
uppercase and lowercase alphabets are possible.
S e c u r i t y
© 2007 Nokia. All rights reserved. 77