Nokia E90 Communicator - Manual (Page 91)

To listen to a voice, open the voice tab, select the voice, and select Play voice .
Voice commands
Select > Tools > Voice comm. .
Use voice commands to make phone calls and launch applications, profiles, or other functions on the device.
The device creates a voice tag for the entries in Contacts and for the functions designated in the Voice commands application.
When a voice command is spoken, the device compares the spoken words to the voice tag in the device. Voice commands are
not dependent on a speaker’s voice; however, the voice recognition in the device adapts to the main user’s voice to recognize
voice commands better.
Make a call
A voice tag for a contact is the name or nickname that is saved on the contact in Contacts.
To listen to a voice tag, open a contact, and select
Options > Play voice tag .
1. To make a call using a voice command, press and hold the voice key.
2. When you hear the tone or see the visual display, clearly speak the name saved on the contact.
3. The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name
and number. After a timeout of 1.5 seconds, the device dials the number. If the recognized contact was not correct, select
Next to view a list of other matches or Quit to cancel dialing.
If several numbers are saved under the contact, the device selects the default number, if it has been set. Otherwise, the device
selects the first available number of the following fields: Mobile , Mobile (home) , Mobile (business) , Telephone , Tel. (home) ,
and Tel. (business) .
Launch an application
The device creates voice tags for the applications listed in the Voice commands application.
To launch an application using a voice command, press and hold the voice key, and clearly speak the name of the application.
If the recognized application was not correct, select Next to view a list of other matches or Quit to cancel.
To add more applications to the list, select Options > New application .
To change the voice command of an application, select Options > Change command , and enter the new command.
Change profiles
The device creates a voice tag for each profile. To set on a profile using a voice command, press and hold the voice key, and say
the name of the profile.
To change the voice command, select
Profiles > Options > Change command .
Voice command settings
To switch off the synthesizer that plays recognized voice commands in the selected device language, select Settings >
Synthesiser > Off .
To reset voice recognition learning when the main user of the device has changed, select Remove voice adapts. .
B u s i n e s s v o i c e a p p l i c a t i o n s
© 2007 Nokia. All rights reserved. 59