Make calls, Options during a video call, Call timers – Nokia N80 User Manual
Page 68: Packet data
Make calls
67
Send touch tones
—to send touch tone strings, for
example, a password. Enter the touch tone string or search
for it in
Contacts
. To enter a wait character (w) or a pause
character (p), press
repeatedly. Select
OK
to send the
tone.
Tip! You can add touch tones to the
Phone number
or
Touch tones
fields in a contact card.
Options during a video call
Select
Options
during a video call for the following
options:
Enable
or
Disable
(video, audio, or both),
Activate
handset
(if a compatible headset with Bluetooth
connectivity is attached) or
Activate handsfree
(when a
compatible headset with Bluetooth connectivity is
attached),
Activate loudsp.
,
End active call
,
Open active
standby
,
Use main camera
/
Use secondary camera
,
Change image order
,
Zoom in
/
Zoom out
, and
Help
.
The available options may vary.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press
, and select
My own
>
Log
>
Recent calls
. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select
Options
>
Clear recent
calls
in the recent calls main view. To clear one of the call
logs, open the register you want to erase, and select
Options
>
Clear list
. To clear an individual event, open a
register, scroll to the event, and press
.
Call timers
To monitor the approximate duration of your incoming and
outgoing calls, press
, and select
My own
>
Log
>
Call
timers
.
To set the display of the call timers while a call is active,
select
My own
>
Log
>
Options
>
Settings
>
Show call
duration
>
Yes
or
No
.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
Options
>
Clear
timers
. For this you need the lock code. See ‘Phone and
Packet data
To check the amount of data sent and received during
packet data connections, press
, and select
My own
>