Nokia 6275i - Manual (Page 100)

67
Normal timer
This countdown timer enables you to enter a specific duration (up to 99 hours, 59 minutes,
and 59 seconds). When the time runs out, your device sounds an alarm.
To set the normal timer, do the following:
1. Select Menu > Organizer > Countd. timer > Normal timer.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear in the standby mode when the countdown
timer is running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its lights. If you
are in standby mode, select Restart or Exit. If you are not in the standby mode, press any key
during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select Exit or press the end key to
clear the timer note.
To change the time:
1. Select Menu > Organizer > Countd. timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
To stop the timer before the alarm sounds, select Menu > Organizer > Countd. timer > Stop timer.
Interval timer
The interval timer in your device allows you to store multiple interval timers. You can define
and store up to 10 timing periods for each interval timer. Once at least one interval timer is
set and stored, you can select the interval timer and one of the stored intervals for that timer.
When the selected interval expires, your phone sounds an alarm, vibrates, and flashes its lights.
To set an interval timer, do the following:
1. Select Menu > Organizer > Countd. timer > Interval timer.
2. Select Add new timer. This option only appears if you have already created an interval timer.
3. Enter a name for the timer, and select Save.
4. Enter a name for the first timer period, and select Save.
5. Enter the desired time interval, and select OK.
6. Select an existing stored period and Edit period, Add period, Delete period, or Start timer.
To use an interval timer:
1. Select Menu > Organizer > Countd. timer > Interval timer, and one of the set interval
timers. Add new timer is the only choice if you have not yet set any interval timers.
2. Select Start timer, View timer, Edit timer, Add new timer, or Delete timer. These options
only appear if you have already created an interval timer.