Nokia 6275i - Manual (Page 82)

49
For more information on connectivity, refer to the PC/PDA Connectivity Guide which can be
downloaded from the Nokia website at http://www.nokia.com/us.
1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Rcvd. data/fax
call and one of the following options:
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
2. When finished with receiving the fax or data call, repeat steps 1 and 2, and select Normal.
Data transfer
To view the transmission speed when sending or receiving data and fax calls. In the standby
mode, select Menu > Settings > Call > Data/fax calls > Data rate display > Graphic or Off.
Call summary
Your device can display the time spent on a call when you hang up. In the standby mode,
select Menu > Settings > Call > Call summary > On or Off.
Show call time
To see the call time on the display screen after each call, select Menu > Settings > Call >
Show call time displ. > On or Off.
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID. In the standby mode,
select Menu > Settings > Call > Ringtone no caller ID > On or Off.
■ Phone settings
Language settings
The phone language affects the time and date formats of the clock, and alarm clock. In the standby
mode, select Menu > Settings > Phone > Phone language and the language of your choice.
Automatic keyguard
You can set the keypad of your device to lock automatically after a preset time delay.
1. In the standby mode, select Menu > Settings > Phone > Automatic keyguard > On or Off.
2. If you select On, Set delay: is displayed.
3. Enter the delay time (in mm:ss format), and select OK.
When keyguard is on, it may be possible to dial the emergency number programmed into
your device.