Multimedia messages – Nokia 7373 User Manual
Page 36
M e s s a g i n g
35
Character support
>
Full
— to select all characters in the messages to be sent
as viewed. If you select
Reduced
, characters with accents and other marks may
be converted to other characters.
Rep. via same center
>
Yes
— to allow the recipient of your message to send you
a reply using your message center (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of multimedia
messages. You may receive the configuration settings for multimedia messaging
as a configuration message. See "Configuration settings service," p. 10. You can
also enter the settings manually. See "Configuration," p. 49.
Select
Menu
>
Messaging
>
Message settings
>
Multimedia messages
and from
the following options:
Delivery reports
>
On
— to ask the network to send delivery reports about your
messages (network service)
Img. size (MMS plus)
— to set the image size in multimedia plus messages
Image size (MMS)
— to set the image size in multimedia messages
Default slide timing
— to define the default time between slides in
multimedia messages
Allow MMS receptn.
>
Yes
or
No
— to receive or block the multimedia message.
If you select
In home network
, you cannot receive multimedia messages when
outside your home network. The default setting of the multimedia message
service is generally
In home network
. The availability of this menu depends
on your phone.
Incoming MMS msgs.
— to allow the reception of multimedia messages automatically,
manually after being prompted, or to reject the reception. This setting is not shown
if
Allow MMS receptn.
is set to
No
.
Allow ads
— to receive or reject advertisements. This setting is not shown if
Allow
MMS receptn.
is set to
No
, or
Incoming MMS msgs.
is set to
Reject
.
Configuration sett.
>
Configuration
— Only the configurations that support
multimedia messaging are shown. Select a service provider,
Default
, or
Personal
config.
for multimedia messaging. Select
Account
and a MMS account contained
in the active configuration settings.