Nokia 7373 - Manual (Page 45)

S e t t i n g s
44
■ Connectivity
You can connect the phone to a compatible device using a Bluetooth wireless
technology or a USB data cable connection. You can also define the settings
for EGPRS dial-up connections.
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: generic access, service discovery application (SDP), generic
object exchange, hands-free, headset, object push, file transfer, dial-up networking,
SIM access, and serial port. To ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the phone to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth
technology communicate using radio waves, your phone and the other devices
do not need to be in direct line-of-sight, although the connection can be subject
to interference from obstructions such as walls or from other electronic devices.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the following options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth function.
indicates that Bluetooth is activated.
Search audio enhanc. — to search for compatible Bluetooth audio devices.
Select the device that you want to connect to the phone.
Paired devices — to search for any Bluetooth device in range. Select New to list
any Bluetooth device in range. Select a device and Pair . Enter an agreed Bluetooth
passcode of the device (up to 16 characters) to pair the device to your phone.
You must only give this passcode when you connect to the device for the first
time. Your phone connects to the device, and you can start data transfer.