Care and maintenance, Replacing the remote control battery – Bose II User Manual

Page 15

Advertising
background image

13

English

F

rançais

Espa

ño
l

Care and Maintenance

Replacing the remote control battery

If your remote control does not work properly, or its range of operation is reduced, it is time to
replace the battery. Follow the instructions below:

1.

Place the remote control face down on a flat surface.

2.

Using your finger, push the tab lock to the side as shown and hold (Figure 10a). Slide the
battery compartment open.

3.

Keeping the remote control face down, insert the new battery into the compartment with
the + symbol facing up (Figure 10b).

4.

Gently slide the battery compartment closed. It locks automatically.

Figure 10

Remote control battery
replacement

WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. Replace only with a lithium CR2032 or DL2032 3-volt battery by Duracell,
Eveready, Energizer, Maxell, New Sun, or Toshiba (available from most electronics stores).

WARNING: Mishandling the remote control battery may cause a fire or chemical burn. Keep

the battery away from children. Do not recharge, disassemble, heat above 212 °F (100 °C), or
incinerate the battery. Dispose of the used battery promptly and responsibly.

For more information, call Bose

®

Customer Service. Refer to the phone numbers on the inside

back cover of this guide.

See operating

instructions

for typ

es of

battery to be used

See ope

rating

instructions

for typ

es of

battery to be used

Positive
symbol

Tab

(a)

(b)

Advertising