Bose LIFESTYLE RC-18S - Manual (Page 12)

Code Switch Setting
12
En
g
lish
De
ut
sc
h
Fr
a
n
ç
a
is
Da
ns
k
Es
pa
ñ
o
l
Itali
a
no
Sv
en
ska
Ned
e
rlan
d
s
You can assign a Bose ® link compatible device to rooms B
through N. Room O is reserved for non-Bose amplifiers
and legacy (older) Bose powered speakers.
For connecting an SA-1 amplifier, see the instructions on
page 13.
How to make it happen
First decide which rooms you want to group to receive the
same audio stream. Then adjust the room and stream set-
tings, using the small switches inside the RC-18S remote
control battery compartment.
For details, refer to “How to change the settings, as
needed” on page 15.
Code Switch Setting
Some simple rules to keep it all straight
Whether you use just one or many RC-18S remotes, keep
these guidelines in mind.
• Remote controls for other-room use must be set with:
• the same house code as the primary remote.
• a different room code from the primary remote.
• a different room code from every other RC-18S
remote, with one exception. If you want to use the
RC-18S in the same room with the primary remote,
it must be set for use in Room A, the same as the
primary remote.
• If the RC-18S remote will be used with Bose ® link com-
patible products, such as:
• with a Bose ® LIFESTYLE ® SA-2 or SA-3 amplifier
and passive speakers, the amplifier and remote
must be set to the same room code.
• with a Bose 3•2•1 Series II or 3•2•1 GS Series II
system, the remote and system must be set to the
same room code.