Bose LIFESTYLE RC-18S - Manual (Page 13)

13
Code Switch Setting
En
gl
is
h
D
eu
ts
ch
Fr
a
n
çai
s
D
a
ns
k
E
s
p
año
l
It
alia
no
Sve
n
s
ka
Ne
de
rl
ands
• If the remote will be used with older non-Bose ® link
products:
• with Bose legacy speakers or systems (purchased
before 2004), only the remote needs a room code
setting. Set it as Room 0.
• with a LIFESTYLE ® stereo amplifier (SA-1) the
RC-18S must be set to Room B so it matches the
amplifier room setting.
Additional legacy product rules
With a few special settings, and operational limitations,
legacy Bose (and other brand) products can work with
your LIFESTYLE
® 18 Series II or 28 Series II DVD home
entertainment system. They may pre-date the Bose ® link
system of multi-room expansion, but older speakers and
systems can still benefit from its flexibility for renewed
performance.
Please note the special rules that apply below.
• To use a Bose LIFESTYLE ® stereo amplifier (SA-1),
which is set to receive audio stream 2:
– keep the RC-18S remote set to receive audio
stream 2.
– set the Protocol option under the Media Center feature
in the System menu to Legacy . Refer to your system
Operation Guide for details on making System
menu changes.
• To use a Bose Wave ® radio, a Wave ® radio/CD,
Acoustimass ® 5 powered speakers, or LIFESTYLE ®
powered speakers:
– set the RC-18S remote in that expansion room for
Room O and to receive audio stream 2.
– if your expansion product includes a remote control
(the Wave radio, for example) set that remote to the
maximum volume you want. Then use the RC-18S
remote to adjust the volume as needed.