Bodum Bistro 11303 User Manual
Page 6
in
S
tr
U
ction for
US
e
5
BLENDER JAR LID OR USE ANY UTENSILS TO DISTRIBUTE
THE FOODS. DO NOT TAKE OFF THE JUG FROM THE BASE
DURING OPERATION.
– The consistency of the mixture is liable to change as
ingredients are added; it may be necessary to increase or
decrease the speed accordingly.
– Only process max. 12 to 14 standard ice cubes at a time.
Use a spatula occasionally to stir ONLY WHEN THE MAIN
BLENDER IS SWITCHED OFF.
– Cool hot foods to max. 80°C / 176°F before blending and
start mixing at and gradually increase to higher speed.
– When mixing at higher speeds ( , ), with full jar or with
hot foods, stop the blender before removing the lid cap
to add ingredients.
– Only process max. ½-inch/1.5cm cubes of food.
– Boiling Liquid or solid frozen foods (except for ice cubes)
should not be placed in the blender jar.
– Always let the blender jar cool down which has come
directly from a hot dishwasher before placing ice, frozen
foods or very cold liquids.
iMportant:
TO PREvENT OvERHEATING OF THE MOTOR, SWITCH OFF THE
BLENDER AFTER 2 MINUTES OF CONTINUOUS OPERATION AND
WAIT 5 MINUTES BEFORE CONTINUING. AFTER 5 CYCLES OF
OPERATION, WAIT 15 MINUTES BEFORE CONTINUING.
– Place the ingredients in the blender jar (3). Only fill up to
1.25l/40oz (1.0l/34oz for frothing and hot liquids).
– Place the lid (2) onto the blender jar so the spout is covered
(A: CLOSE ( ) should align with spout) and push it down
firmly. Place the lid cap (1) into the opening in the lid.
Turn on the main power switch (10) on the back of the
housing. The indication light lights up. The START-button (7)
blinks to indicate the blender is now in the standby-mode.
– Select a speed by turning the speed control (5).
–
Press the START - button (7) to start the motor. The
START - button remains lit up continuosly while the appliance
is in operation.
– In
, or speeds, you can remove the lid cap (1) care-
fully to add liquids or ice cubes. Make sure the content
cannot spill out before you remove the lid cap. When
operating with full pitcher or hot liquids at high speeds
( , ), stop the blender before removing the lid cap to
add ingredients. If blending hot foods or liquids, remove
the lid cap and operate only on speed.
– Press the STOP-button (8) to stop.
– If you prefer to use the pulse-mode for mixing, set the