Brother P-touch PT-2700 - Manual (Page 16)

14 Power Supply
GETTING STARTED
AC Adaptor
Insert the plug on the AC adaptor cord into the connector marked DC IN 9-9.5V
on the P-touch.
Insert the AC adaptor plug into a standard electrical outlet.
1
2
• Turn the P-touch off before disconnecting the AC adaptor.
• Disconnect the AC adaptor from the P-touch and electrical outlet when you do not intend to
use the P-touch for an extended period.
• Do not pull or bend the AC adaptor cord.
• Use only the AC adaptor (Model H1) designed exclusively for your P-touch. Failure to
observe this may result in an accident or damage. Brother shall not assume any responsibility
for any accident or damage resulting from not using the specified AC adaptor.
• Do not connect the AC adaptor to a non-standard electrical outlet. Failure to observe this may
result in an accident or damage. Brother shall not assume any responsibility for any accident
or damage resulting from not using a standard electrical outlet.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory and clock settings will also be cleared.
For backup of memory and clock setting, when the AC adaptor is unplugged from the P-touch,
please use AA-size alkaline batteries (LR6).