Brother P-touch PT-2700 - Manual (Page 38)

EDITING A LABEL
36
Setting Label Attributes
Using the key, you can create a label with a frame around the text and specify the
label length and tab length. (Cut Options and Length Adjust setting which may be
needed when printing a label can also be set by using the
key. Refer to "Tape
Cutting Options" and "Adjusting the Label Length Accuracy" on page 62 and 64.)
Press the key.
The current settings are displayed.
Select an attribute using the or keys, and then
set a value for that attribute using the or keys.
Press the or key to apply the settings.
Setting Label Attributes
1
When setting the label length or tab length, hold down
the or keys to change the value faster.
2
New settings are NOT applied if you do not press the
or key.
3
• Press the key to return to the previous step.
• Press the key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.