Sharp AY-XP9RMR-AE-X9RMR - Manual (Page 8)

GB-6
ADJUSTING THE AIR FLOW DIRECTION TURBO FAN OPERATION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button to select the
vertical air flow direction.
: The vertical airflow louver will swing.
: The vertical airflow louver
will stop at selected position.
To stop the desired position, press the
SWING button during the louver swinging.
• “ ” will disappear on the remote control.
NOTE:
• In the COOL or DRY mode, the adjustment
range is narrower the swing range in order to
prevent condensation from dripping.
CAUTION:
Never attempt to adjust the vertical airflow louver
manually.
• Manual adjustment of the vertical airflow louver
can cause the unit to malfunction.
• When the vertical adjustment louver is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time, this
may result in condensation.
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air flow direction using
the louver lever.
OFF
The unit runs at extra high fan speed to reach
the desired room temperature faster.
1
In the COOL or HEAT mode, press the
TURBO FAN button.
• “ ” will be displayed on the remote control.
• The red TURBO FAN lamp ( ) will light up.
TO CANCEL
Press the TURBO FAN button again.
• “ ” will disappear on the remote control.
• The red TURBO FAN lamp (
) will turn
off.
NOTE:
• When the unit is turned off, the use of the TUR-
BO FAN operation will be memorized, and it will
be activated the next time you turn on the unit.
• TURBO FAN operation is not available in AUTO,
DRY or FAN mode.
1
1
louver lever
01_AYXP9_12RMR_OM_EN.indd 6 14/08/29 16:48