Sharp R-28STW Four à micro-ondes solo - Manual (Page 172)

GB-10
OTHER CONVENIENT FUNCTIONS
1. SEQUENCE COOKING
This function allows you to cook using up to 3 diff erent stages which can include manual cooking time and
mode and/ or time defrost as well as weight defrost function. Once programmed there is no need to interfere
with the cooking operation as the oven will automatically move onto the next stage. An audible signal will
sound once after the fi rst stage. If one stage is defrosting, it should be in the fi rst stage of sequence cooking.
NOTE: Auto menu cannot be set as one of the multiple sequences.
Example: If you want to cook food for 20 minutes on P100 microwave power and then for 5 minutes with
P80 microwave power. The steps are as follows:
- 1. Press the MICROWAVE button, P100 will appear in the LED display.
- 2. Press the MICROWAVE button once more to confi rm the setting.
- 3. Enter the cooking time by rotating the ENTRY dial until the display show “20:00” minutes.
- 4. Press the MICROWAVE button, P100 will appear in the LED display.
- 5. Rotate the ENTRY dial to select the microwave power to P80.
- 6. Press the MICROWAVE button once more to confi rm the setting.
- 7. Enter the cooking time by rotating the ENTRY dial until the display show “5:00” minutes.
- 8. Press the START/+1min button to start cooking.
2. +1min FUNCTION (Auto minute)
Direct start
You can directly start cooking on P100 microwave power level for 1 minute by pressing the START/ +1min
button. The cooking process will start immediately and each time the button is pressed this will increase the
cooking time by 1 minute.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
3. DELAY START
DELAY START cooking allows you to program the oven to start cooking at a point later in the day.
Before setting, make sure the clock is set to the correct time of day.
Example:
Follow the example below for starting the microwave automatically at a later point of time for 7 minutes on
P80. The maximum time-delay is 23 hours and 59 minutes.
- 1) Press the MICROWAVE button. P100 will be displayed.
- 2) Rotate the ENTRY dial to select the microwave power level to P80.
- 3) Press the MICROWAVE button once more to confi rm the setting.
- 4) Enter the cooking time by rotating the ENTRY dial until the display show “7:00” minutes.
After the above steps, please do not press START/+1min button.
- 5) Press the CLOCK SET/ DELAY START button. The display will show the current time and the hours fi gure
will fl ash. Moreover the clock indicator will light up.
- 6) Rotate the ENTRY dial to set the hour of the desired start time for cooking.
The input time should be within 0-23.
- 7) Press CLOCK SET/ DELAY START button and the minutes fi gure will fl ash.
- 8) Rotate the ENTRY dial to set the minutes of the desired start time for cooking.
The input time should be within 0-59 minutes.
- 9) Press the START/+1min button to confirm the setting for the delay start. The clock indicator will
flash. When the pre-programmed time arrives, an audible signal will sound twice and the oven starts
automatically for 7 minutes on P80. At the same time the clock indicator will disappear and the microwave
indicator and high heat indicator will appear on the display.