Sharp MX-B201D - Manual (Page 75)

74
8 Chapter 8
USER SETTINGS
The user settings allow you to customize machine settings to better meet your needs.
USER PROGRAMS
The user settings consist of the following items.
To change the user program settings as explained in "SELECTING A SETTING FOR
A USER PROGRAM" (p.79).
Copy mode
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
1 AUTO CLEAR
1: 10 SEC.
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF
• Auto clear time automatically
returns the copy settings to the
initial settings (p.9) if no keys
are pressed for a preset period
of time following the end of a
copy job.
• This program is used to select
the period of time. Auto clear
time can also be disabled.
2 PREHEAT MODE
1: 30 SEC.
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.
• This function automatically
switches the machine to a low
power consumption state if the
set duration of time elapses
without the machine being used
when the power is on. The
power save indicator lights up,
however, the keys on the
operation panel can be used.
Normal operation automatically
resumes when a key on the
operation panel is pressed, an
original is placed, a print job is
received.
3 AUTO SHUT-OFF
1: ON
2: OFF • Use this setting to enable or disable
auto power shut-off mode.