Sharp MX-B201D - Manual (Page 77)

USER SETTINGS
76
13
MEM. FOR
PRINTER
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
• Use this to change the
proportion of machine memory
used for printer mode.
14
AUTO KEY
REPEAT 1: ON
2: OFF
• Use this setting to select
whether or not holding down a
key causes repeated input of the
key. For keys that normally
cause a set value to increase
when held down (for example,
holding down the [
] key ( )
or [ ] key ( )), this program
can be used to have the set
value not change when the key
is held down.
15 KEY PRESS TIME
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
• Use this setting to select how
long a key must be pressed for
the input to be accepted. By
selecting a longer time, you can
prevent settings from being
changed by the accidental
pressing of a key.
16
KEY TOUCH
SOUND
1: LOW
2: HIGH
3: OFF
• This sets the volume of beep
signals. (p.80)
17
SOUND AT
DEFAULT 1: ON
2: OFF
• Use this to sound a beep when
a base setting is selected.
(p.80)
18
TONER SAVE
MODE 1: ON
2: OFF
• This mode reduces toner usage
by about 10% when copying.
Toner save mode is effective
when the exposure mode is
AUTO (
) or TEXT ( ).
19 AE LEVEL ADJUST
1: SPF/RSPF
(Adjustment to
5 levels is
possible.)
2: DOCUMENT
GLASS
(Adjustment to
5 levels is
possible.)
• This is used to adjust the
exposure level.
• The automatic exposure level
can be adjusted separately for
the document glass and the
RSPF.
• For the procedure for adjusting
the exposure and guidelines for
numeric values, see page 24.
The factory default setting for
the exposure level is "centre".
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation