Sharp EL-1750PIIIGY - Manual (Page 8)

6
point. Use of , and will automatically
override the add mode and decimally correct
answers will be printed.
CLOCK / CALENDAR KEY:
• Each time this key is pressed, the mode
switches.
Calculation mode
→ Date display mode →
Clock display mode → Calculation mode
• Use this key also to adjust date and time
(see “GRAND TOTAL / RATE SETTING
MODE SELECTOR”).
PAPER FEED KEY
LAST DIGIT CORRECTION KEY
NON-ADD / SUBTOTAL KEY:
Non-add – When this key is pressed right after
an entry of a number in the Print mode, the
entry is printed on the left-hand side with the
symbol “#”. This key is used to print out
numbers not subjects to calculation such as
code, date, etc.
Subtotal – Used to get subtotal(s) of additions
and/or subtractions. When pressed following
the
or key, the subtotal is printed with
the symbol “ ◊” and the calculation may be
continued.
By pressing this key even in the Non-print
mode, the displayed number is printed
without any symbol.
• When the POWER SWITCH; PRINT / ITEM
COUNT MODE SELECTOR is set “•”, “P” or
“P•IC” position, and Date or Clock is
displayed, press this key to print the
displayed contents, including “#” symbol,
from the left side of the paper roll.
Example:
Date printing
#15 • 09 • 2004 • • • • • •
(In the case of 15 September 2004)
Clock printing
#10 • 30 • • • • • • • • • • •
(when the time is 10:30 a.m.)
#18 • 25 • • • • • • • • • • •
(when the time is 6:25 p.m.)
• When the Date / Clock printing is complete,
the Calculation mode is restored.
CLEAR / CLEAR ENTRY KEY
Press this key twice, followed by
, to print
the set tax rate.
TOTAL KEY
EQUAL KEY
EL-1750PIII(LCO)-Eng 04.9.15, 3:27 PM 6