Neff T13D83N2 - Manual (Page 32)

32
Keep warm function
The Keep warm function is suitable for melting chocolate or
butter and for warming food and ovenware.
Switching on the Keep warm function
1. Select the hotplate.
2. Touch the L symbol.
– appears in the heat setting display. The Keep warm function
is switched on.
Switching off the Keep warm function
Select the hotplate and touch the L symbol.
‹ appears in the
heat setting display.
The hotplate switches off after 10 seconds and the residual
heat indicator appears.
Control panel pause
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the " symbol. An audible signal sounds.
The indicator light above the " symbol lights up. The control
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
Energy consumption display
You can use this function to have the total energy consumption
between switching the hob on and off displayed.
Once switched off, the energy consumption in kilowatt hours
(e.g. 1.08 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other things, on
the voltage quality of the power supply.
The display has not been activated. You can find out how to
activate the display in the Basic settings section.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
N:K
Display Function
™‚ Automatic childproof lock
‹ Switched off.*
‚ Switched on.
™ƒ Audible signal
‹ Confirmation signal and operation error signal are switched off.
‚ Only the operation error signal is switched on.
ƒ Only the confirmation signal is switched on.
„ Confirmation signal and operation error signal switched on.*
* Basic setting