Replacing the cooking compartment bulb, Risk of electric shock, Note – Neff C57W40N3GB User Manual

Page 12: Method, Carefully lift out the appliance, Insert the new halogen bulb (fig. c), Replacing the glass cover, After-sales service, E number and fd number, To book an engineer visit and product advice

Advertising
background image

12

Replacing the cooking compartment bulb

You can replace the cooking compartment bulb. Heat-resistant

25 watt, 240 V halogen bulbs can be obtained from the after-

sales service or from a specialist retailer.

:

Risk of electric shock!

Never replace the oven light when the appliance is switched on.
Pull out the mains plug or switch off the appliance at the circuit
breaker in the fuse box.

Note: Always remove the new halogen bulb from the packaging

using a dry cloth. This increases the service life of the bulb.

Method
Note:
You must remove the whole appliance in order to replace

the cooking compartment light. Follow the installation

instructions.

1.

Unplug the appliance from the mains or switch off the circuit

breaker in the fuse box.

2.

Open the appliance door.

Undo the securing screws on the right and left-hand side of

the oven. Follow the installation instructions.

3.

Carefully lift out the appliance.

4.

Undo the screw from the light cover on the outer left-hand

side wall and remove the cover. (Fig. A) Pull out the halogen

light. (Fig. B).

5.

Insert the new halogen bulb (Fig. C)

6.

Screw the lamp cover in place.

Reassemble the appliance in the reverse order.

7.

Switch the circuit breaker in the fuse box back on or plug in

the mains plug.

Replacing the glass cover
If the glass cover in the oven is damaged, it must be replaced.

You can obtain covers from the after-sales service. Please

supply your appliance's E number and FD number.

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate bearing these numbers can

be found in the oven. You can make a note of the number of

your appliance and the telephone number of the after-sales

service in the space below to save time should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.
Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.
This appliance corresponds to the standards EN 55011 and

CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose

of heating food. Class B states that the appliance is suitable for

private households.

Technical data

%

$

&

E no.

FD no.

After-sales service

O

GB

0844 8928989

Calls from a BT landline will be charged at up to

3 pence per minute. A call set-up fee of up to 6 pence

may apply.

IE

01450 2655

0.03 € per minute at peak. Off peak 0.0088 € per

minute.

Power supply

220-240 V, 50 Hz

Maximum total connected load 1180 W
Microwave power setting

1000 W (IEC 60705)

Microwave frequency

2450 MHz

Fuse

min. 10 A

Advertising
This manual is related to the following products: