Neff C57W40N3GB - Manual (Page 9)

9
Notes
■
Between the times ƒƒ : ‹‹ and † : †Š the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■
When the Timer Q and Cooking time x clock functions are
in use, a signal sounds after the settings have elapsed and
the corresponding symbol flashes. To stop the audible signal
before it finishes, press the clock function ÁÀ button
■
If you wish to cancel a setting, turn the set time back to ‹ : ‹‹
and switch the appliance off.
■
The setting can be corrected using the rotary selector if
necessary.
Switching the clock display on and off
1. Press and hold the clock function button ÁÀ for a few
seconds.
The clock display is switched off. If a clock function is active,
the associated symbol remains illuminated.
2. Press and hold the clock function button ÁÀ for a few
seconds.
The clock display switches on.
Timer
1. Press the KJ clock function button repeatedly until the KJ
and Q symbols light up.
2. Set the duration using the rotary selector (e.g. † : ‹‹ minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1. Set a microwave power setting.
2. Press the clock function button repeatedly until the KJ
and x symbols light up.
3. Set the cooking time using the rotary selector
(e.g. ‚ : „‹ hours).
The setting is applied automatically.
4. Press the ƒ button.
The set cooking time counts down.
The cooking time has elapsed
A signal sounds. The appliance stops heating. The display
shows 0:00. You can cancel the audible signal before it has
finished by pressing the ÁÀ button.
Changing the cooking time
Change the cooking time using the rotary selector.
Cancelling the cooking time
Using the rotary selector, turn the cooking time back to 0:00.
The change is applied after a few seconds. The cooking time
has been cancelled.
Checking time settings
If several time-setting options have been set, the corresponding
symbols appear in the display. The KJ symbol is in the
foreground in front of the time function symbol.
To check the kitchen timer
V , cooking time x or clock
time 0 , press the ÁÀ button repeatedly until the KJ symbol
is in front of the appropriate time function. The relevant value
will appear for a few seconds in the clock display.
Setting the clock
You can only change the clock when no other clock function is
active.
1. Press the clock function KJ button repeatedly until the KJ
and 3 symbols light up.
2. Turn the rotary selector to set the time of day.
3. Press the KJ clock function button.
Your setting is applied.
Changing the clock
e.g. from British Summer Time to Greenwich Mean Time.
Make the settings as described in steps 1 and 2.
x Cooking time The appliance switches off automatically
after a set cooking time x
(e.g. ‚ : „‹ hours)
3 Clock Setting the clock
Clock function Use