5installation clearances – Whirlpool WFC7500VW User Manual
Page 5
5
Installation clearances
■
The location must be large enough to allow the washer door
to be fully opened.
■
Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90°, and
it is not reversible.
■
Additional clearances might be required for wall, door, and
floor moldings.
■
Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.
■
Companion appliance spacing should also be considered.
Washer Dimensions
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
Recessed or closet installation - Washer on pedestal
36.2
(92 cm)
23.4"
(59.5 cm)
"
32.9"
(83.5 cm)
20.1"
(51 cm)
1"
(2.5 cm)
1"
(2.5 cm)
32.9" min.
(83.5 cm)
23.4"
(59.5 cm)
2" (5 cm)
A. Side view - closet or confined area
B. Closet door with vents
A. Recessed area
B. Side view - closet or confined area
34"
(86.4 cm)
A
B
3"
(7.6 cm)
3"
(7.6 cm)
1"
(2.5 cm)
4"
(10.2 cm)
20.1"
(51.0 cm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1"
(2.5 cm)
20.1"
(51.0 cm)
1"
(2.5 cm)
1"
(2.5 cm)
23.4"
(59.5 cm)
4"
(10.2 cm)
18" min.
(45.7 cm)
A
B