Brother FAX-222 - Manual (Page 38)

5 - 7 S E T U P R E C E I V E
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Fax Receive
Code is
5 1 . The preset Telephone Answer Code is # 5 1 .
1
Press Function/Set , 2 , 4 .
2
Press or to select ON (or OFF) and press
Function/Set .
3
If you want to, enter a new Fax Receive Code, then
press
Function/Set .
4
If you want to, enter a new Telephone Answer
Code, then press
Function/Set .
5
If you want to, enter a new Activation Voice Code,
then press
Function/Set .
6
Press Stop to exit.
Polling
Don’t hang up the call from the cordless phone until the voice call has been
transferred to the fax machine. You will know when this is because you will no longer
be able to hear or talk to the caller via the cordless phone. If you do not wait until this
point before hanging up from the cordless phone, the call will be lost.
If nobody answers at the fax machine, pseudo-ringing stops after 30 seconds. In that
case, it may still be possible to speak with the caller from the cordless phone. Speech
between the fax machine and the cordless phone (= intercom) is not possible.
If you are always disconnected when accessing your external TAD remotely, try
changing the Fax Receive Code from
5 1 to # # # and the Telephone Answer Code
from # 5 1 to 9 9 9 .
Polling is the process of retrieving faxes from another fax machine. You can use your
fax machine to “poll” other machines, or you can have someone poll your machine.
All parties involved in polling need to set up their fax machines to accommodate
polling. When someone polls your machine to receive a fax, they pay for the call; if
you poll someone’s fax machine to receive a fax, you pay for the call.
(See Canceling a Scheduled Job, page 6-10.)
Some fax machines do not respond to the polling function.
REMOTE ACT.:ON?
FAX RECEIVE: * 51
TEL ANSWER:#51
ACT.VOICE:*81