Brother FAX-222 - Manual (Page 71)

M E S S A G E C E N T E R ( F O R F A X - 3 3 3 M C O N L Y ) 9 - 9
Remote Commands
Follow the commands below to access features remotely. When you call the
fax machine and enter your Remote Retrieval Access Code (159
), the system will
signal you with two short beeps to enter a remote command.
Remote Commands Operation Details
91 Playing Voice Messages After one long beep, the fax machine plays
ICM.
1 (go back) Press 1 while listening to an ICM to repeat it.
If you press 1 before a message, you will hear
the previous message.
2 (Skip to next) While playing the ICM, you can skip to the
next message.
9 STOP Playing Stop playing the ICM.
92 Record Memo After one long beep, you can record a memo.
To stop recording, press
9 .
93 Erase all ICM If you hear one long beep, the erase is accepted.
If you hear three short beeps, you cannot erase
because all voice messages have not been
played, or there is no voice message to erase.
*This code erases all recorded messages, not
one at a time.
94 Play and Record OGM in
memory
1 Play 1 MSG CTR OGM The fax machine plays the selected OGM. You
can stop playing OGMs by pressing
9 .
2 F/T OGM
3 PAGING MSG.
2 Record 1 MSG CTR OGM After one long beep, you can record the
selected OGM. You will hear the message
played once. You can stop recording the
message by pressing
9 .
2 F/T OGM
3 PAGING MSG.