Blanco BFWM7 - Manual (Page 16)

13
Child Lock
To prevent the knobs from being played with by your children you may activate “child lock” option. Activating the “Child Lock” option
prevents any change from being made to a set program.
To activate child lock, press both on the second and the fourth auxiliary function buttons together for 3 seconds after the machine
starts the washing operation.
After activating the Pre-wash auxiliary function, the LED will blinking.
Only On/Off button will be in operation when the child lock option is selected.
To deactivate child lock, re-press same auxiliary function buttons (second and fourth) for 3 seconds.
In order to open the door at the end of the washing program or to change program selection, child lock must be deactivated if
selected.
When the machine is turned on, the LED of the selected program will light up.
If there is no light on the program selection knob, it means that program selection knob is stuck between two
programs. In that case, the knob should be adjusted on the correct program again.
If the program selection knob is turned while the machine is on and executing the selected program , all LED on
the program selection knob will be off. When the knob is set to selected program again, related LED will be on.