Brother DCP 1000 - Manual (Page 18)

1 - 4 G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R / P R I N T E R
YL4DCP-1000-FM5.5
Inserting Originals for Copying (and Scanning)
You can copy and scan from the ADF (Automatic Document Feeder) or from
the scanner glass.
Using the ADF (Automatic Document Feeder)
The ADF can hold up to 30 pages, feeding each one individually through the
machine. Use standard (20 lb/75g/m
2 ) paper when using the ADF. Always fan
the pages well before placing them in the ADF.
Recommended Environment
■
Make sure documents written with ink are completely dry.
■
Originals must be from 5.8 to 8.5 inches wide, and 5.8 to 14 inches long.
1 Pull up the Document Extension.
2 Fan the pages and stagger them at a 30 degree angle. Insert the pages face up,
top edge first in the ADF until you feel them touch the feed roller.
3 Adjust the paper guides to fit the width of your original.
4 Unfold the document stopper.
Temperature: 68°F – 86°F (20°C – 30°C)
Humidity: 50% – 70%
Paper: Xerox 4200 or equivalent (20LB/LTR)
DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric. (To fax this kind of document, see
Using the Scanner Glass , page 1-5.)
Document Stopper
30 °
Originals are
Face Up
in the ADF