Brother FAX-2840 - Manual (Page 11)

General Setup
5
1
Deep Sleep mode
1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will automatically enter Deep
Sleep mode, and the LCD will show Deep
Sleep. Deep Sleep mode uses less power
than Sleep mode. The machine will wake up
and start warming up when the machine
receives computer data or when you press a
key on the control panel.
Lifting or replacing the handset will also wake
up the machine from Deep Sleep mode.
Toner Settings
1
Toner Setting
(Continue mode)
1
You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
The default setting is Stop.
a
Press Menu, 1, 7.
General Setup
7.Replace Toner
b
Press a or b to choose Continue or
Stop.
Press OK.
c
Press Stop/Exit.
Note
• If you continue printing in the Continue
mode, we cannot guarantee the print
quality.
• While using Continue mode the print may
appear faint.
• After replacing the toner cartridge with a
new one, the Continue mode will go back
to the default setting (Stop).