Brother FAX-2840 - Manual (Page 57)

Routine maintenance
51
A
• (For MFC-7240)
If the machine receives a print job before
you put the sheet of paper in the manual
feed slot, the machine will finish the Drum
Cleaning process first, and then print the
print job.
h
When the machine has finished
cleaning, the machine returns to Ready
mode.
i
Repeat steps e to h two more times
using a new blank sheet of paper each
time. Upon completion please discard
the used paper.
j
Close the back cover (face-up output
tray) and the manual feed slot cover.
If the problem is not solved yet, follow the
steps below:
a
Open the front cover, and leave the
machine turned on for 10 minutes for the
internal fan to cool the internal parts of
the machine that are extremely hot.
b
After the machine has cooled down, turn
off the machine’s power switch.
Note
(For FAX-2840 and MFC-7240)
To prevent you from losing any important
messages, see Basic User’s Guide:
Transferring your faxes or Fax Journal
report.
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait for the machine to cool
down before you touch the internal parts of
the machine.