Brother FAX-2840 - Manual (Page 35)

Receiving a fax
29
4
Printing a fax from the
memory
4
If you are using the Fax Storage feature
(Menu, 2, 5, 1), you can still print a fax from
the memory when you are at your machine.
(See Fax Storage uu page 23.)
a
Press Menu, 2, 5, 3.
Remote Fax Opt
3.Print Fax
b
Press Start.
c
Press Stop/Exit.
Receiving faxes into memory
when the paper tray is empty
4
As soon as the paper tray becomes empty
during fax reception, the LCD shows No
Paper and begins receiving faxes into the
machine’s memory. Put some paper in the
paper tray. (See Basic User’s Guide: Loading
paper and print media.)
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray and press
Start.
Polling overview
4
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive
4
Polling receive lets you call another fax
machine to receive a fax.
a
Make sure you are in FAX mode .
b
Press Menu, 2, 1, 7.
Setup Receive
7.Polling RX
c
Enter the fax number you are polling.
Press Start.
The LCD will show Dialing.
Sequential polling
4
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
a
Make sure you are in FAX mode .
b
Press Menu, 2, 1, 7.
Setup Receive
7.Polling RX
c
Specify the fax machines you want to
poll by using One Touch, Speed Dial,
Search, a Group or the dial pad. You
must press OK between each location.
Press OK.
d
Press Start.
The machine polls each number or
Group number in turn for a document.